Arecont Vision H.264 Day/Night SurroundVideo
®
Series Installation Manual
12 | Page
H.264 Day/Night SurroundVideo
®
Pole Mount Adapter Installation Instructions
Inside the box:
A. Pole Mount Adapter
B. 2x Compress Fittings
C. 2x Small Steel Straps
D. 2x Large Steel Straps
E. Pack of four (4) machine screws
Not included but needed:
#2 Phillips head screw driver
SV-WMT, Wall Mount Adapter
Image 35
NOTE: H.264 Day/Night SurroundVideo
®
and
MegaDome™ share same pole mount
adapter, MD-PMA.
39. Remove Pole Mount Adapter, Compress
Fittings, Steel Straps and hardware from the
box.
40. Install Compress Fittings to Pole Mount
Adapter as shown in Image 36.
41. Attach SV-WMT, Wall Mount Adapter, to Pole
Mount Adapter as shown in Image 37.
42. Run Ethernet Cable and outside power cable (if
necessary) through the Compress Fittings
and SV-WMT, Wall Mount Adapter.
43. Use the supplied two Steel Straps to attach the
Pole Mount Adapter to the pole and tighten
the compression screws (Image 37).
44. Attach camera with in-ceiling mount to Wall
Mount Adapter. Please reference “Mounting
the Camera”, if needed.
45. Tighten the Compress Fittings to seal the
wiring holes.
Image 36
Image 37
Commentaires sur ces manuels